Levelswitch 5 / IV u

The electronic difference levelswitch 5 - IV / u is designed to control the waterlevel of aquariums, ponds, basins, tanks etc. to be between two setpoint. The levelswitch works reliably with salt - and freshwater. The sensors will be attached to the rim of the container using the provided holder. By easily shifting the sensor rods up or down in the holder the upper and lower switching points are adjusted. The difference levelswitch 5 - IV / u has two operating modes, filling and depleting, which a.re selected with a rotary switch. The operating manual for the difference levelswitch 5 - IV / u is available in the download area.



54umitHalter

Level difference switch 5 / IV - u with sensors and holder

 

Technical Data Article5 / IV - u (difference levelswitch)
Purpose: Automatic filling or draining
Applications:

osmosis facilities

spillover tanks

aquariums

storage tanks etc.

Sensor length:

160 mm / 260 mm

other level differences (sensor lengths) on request

min. level difference 3mm, max. level difference 100mm

Selector switch "ON"

outlet engaged:

     with rising waterlevel and the tip of the short sensor getting in contact with water

outlet disengaged:

     with falling waterlevel and the tip of the long sensor losing contact to water

Selector switch "OFF"

outlet disengaged:

     with rising waterlevel and the tip of the short sensor getting in contact with water

outlet engaged:

     with falling waterlevel and the tip of the long sensor losing contact to water

Power outlet:

max. 150 watts

max. 500 watts, enhanced version (-R)

Power consumption: < 3 watts
Power supply: 235 volts / 50 Hz
Housing: black plastic case
Power cord: 1 m with "Schuko" - plug
Mains fuse:

1,6 A (150 watts)

2,5 A (500 watts), enhanced version (-R)

Operating mode: for continuous operation, 100 % duty ratio
Ground sensor connection:

red banana socket (a ground sensor may be necessary

for electrically isolated containers, i.e. a plastic tank)

Sensor(s): 8mm Ø, 100 % saltwater resistant
Switching hysteresis: 2 mm waterlevel difference
Status indication: red and green leds for function control
Dimensions: 200 mm x 85 mm x 55 mm (L x W x H)
Special modifications deliverable:

additional ground sensor

extended sensor length

extended sensor cable(s)

multiple sensors